March 30, 2024

Things to Pay Attention to when Buying a Used Garbage Truck

Things to Pay Attention to when Buying a Used Garbage Truck

In order to save investment costs, some friends choose to buy used-car garbage trucks. Then when buying a used car, pay attention to what to do and what to do after buying a used car.

1. Be sure to remember to replace the timing belt and pump in time

For garbage trucks with a vehicle age of more than 5 years or a mileage of more than 70,000 kilometers, the safest way is to replace the new timing belts, and also to replace the pumps and belts at the same time. This can save a lot of money.

2. After buying a used car, you must first replace the engine oil, transmission oil, brake oil, and tank cooling water.

3. Transmission oil is very easy to ignore. Friends should replace the gearbox oil that is required by the factory after buying a used car. This is very important for cars over 5 years old.

4. Check the tires if the tires have been worn away. Replace them immediately. Some vehicles may have been replaced with tires for three to four years. The tires may seem clean or the pits are still deep. However, the gums may have hardened and cannot be properly grasped. Ground ability. Friendly reminder, if there is a bulge, it must be replaced.

5. In addition to the common vacuum cleaning and deep steam cleaning, steam cleaning compartments are best equipped with steps such as disinfection, wiping, and negative ion air purification to remove all kinds of odors.

If the funding conditions are not very difficult, it is recommended that friends buy new garbage trucks.

To purchase garbage trucks, please go to Xigong Chusheng, first-class technology, first-class quality, and preferential garbage truck prices, which is your best choice!

Metal processing Force Control System

Our metal processing Force Control System, metal processing active contact flange, metal processing Constant Force Actuator have many advantages over other grinders. It can realize flexible grinding, quick repsond to surface changing, and instant adjusting. Traditional mechanic hand lacks flexibility, and it is not easy to adjust, hard to realize mass production.

Metal processing force control system, metal processing constant force actuator, metal processing active contact flange

DARU Technology (Suzhou) Co., Ltd. , https://www.szdaruactivecontactflange.com