Southerners have to go to the north in winter, and in the current popular phrase, they must be frozen into dogs. The lowest temperature in the southern part of the winter is minus a few degrees Celsius. The minimum temperature in Heilongjiang’s Mohe in winter is It reached minus 60-40°C. This is the case where ordinary diesel oil used in the truck crane is frozen. The temperature at which gasoline can freeze is between -70 degrees Celsius. When the temperature is already very low, you can use the hot water to heat the truck-mounted diesel oil that has been frozen. However, it is important to remember that you cannot use an open flame to bake the hot oil tank. This may lead to If the vehicle crane catches fire, it may be possible to park the truck in a well-lit and warmer location so that the truck-mounted diesel can freeze naturally. Or add some diesel oil with a low freezing point to freeze it, and you need to keep the tank warm. When parking the vehicle, try to select some positions that can block the air inlet. In the truck-mounted diesel, the diesel anti-coagulant is added to the diesel fuel at a relative proportion, and the problem of anti-freezing and anti-condensation can be achieved, and the unobstructed running of the truck crane can be largely ensured. We use No. 0 diesel as an example. If the temperature is already below zero, the No. 0 diesel truck crane will not be able to drive, if it is added in a ratio of 1 to 1,000 After the anti-coagulant, it can be shown from the test data that the highest temperature of the cold filter point can be reduced to 20 degrees Celsius, and the lowest one can reach minus 16 degrees Celsius. If the maximum freezing point is reduced to minus 38 degrees, the No. 0 truck-mounted diesel can add anti-coagulant in a ratio of 1:1 to achieve a good anti-condensation of -10 diesel. effect.
Super-power, for thick and thin plates
Equipped with high/super power laser device, efficient thick plate cutting is no longer a dream, thin plate cutting is more speedy; BODOR database of cutting process will provide you with data support of performance and energy saving to save your cutting cost. Tailor-made high power laser machine for customers, its maximum cutting range includes 50mm aluminium plate, 130mm stainless steel and 70mm carbon steel plate.
Laser Cutting Machine Laser Cutting Machine,Laser Engraving Machine,Cnc Laser Cutting Machine,Metal Laser Cutting Machine Jinan Bodor CNC Machine Co., Ltd. , https://www.bodorcnc.com
Clone
Mold pouring, clone production; integrally formed, reject splicing bodor Laser Cutting Machine cutting 500w fiber cutting machine
Durable
Using flake graphite cast iron, the lowest tensile strength of which is 200MPa. High carbon content, high compressive strength and high hardness. Strong shock absorption and wear resistance. Low thermal sensitivity and bed gap sensitivity reduce the loss of equipment in using, so the machine accuracy could maintain for a long time, and no deformation in a life cycle.