March 29, 2024

The correct use of large tank trucks

In recent years, the occurrence of traffic accidents on large-scale tanker trucks has been on the rise, most of which are caused by improper operation and inappropriate methods of use. How can we prevent some traffic accidents from happening? In the use of the process and need to pay attention to what details?

1.jpg

First of all, each large tanker truck must have a special fire extinguisher, and there are also rods that touch the subway chain and avoid electricity. In the process of driving a large tanker, touch the subway chain should touch the inside. When the tanker is refueling or when it is draining, it is necessary to insert the plug into the more humid ground. When the oil valve is released, the drain pipe must not leak, the outlet of the oil tank is unimpeded, and there is a habit of frequently cleaning the filter of the oil pump, and no dirt can enter the delivery hose.

Neither the carburetor of an internal combustion engine nor the exhaust pipe of a large-scale tanker can be tempered. It is recommended to install the exhaust pipe directly in front of the car.

Friends of the tank truck must be careful not to wear shoes with iron nails, nor can they smoke near the tanker. When stopping the enlarged tanker, pay attention not to park near the fire source. Just as the summer temperatures are high, the tanker is finally placed in a relatively cool place. It is advisable to have a place where special care and safety measures are available.

All the lighting equipment in the car must be very good, the lamps and lanterns are below 36 watts to avoid sparks and accidents. When the sediment in the tanker is frozen, avoid using fire and you can push it to the thawing way of heating house, hot water, steam and so on. In the routine maintenance of the bottom of the vehicle, the gas turbine must be stopped, and the wheel must be fastened with a hand-held robot.

Every time a large tanker truck is inspected and repaired, it needs to be tested. It must be driven by skilled personnel. There must be no people and objects in the vehicle. If it is necessary to test the road on the road, it must be accompanied by trials issued by various traffic departments. Trial photo taking.


Zinc Alloy Die Casting products in order to prevent surface oxidation and the appearance is only superficial. Zinc alloy material properties that well to accept the material surface treatment affordable. So, the usual surface treatment, what does?


As follows:
1: Baked paint (baking enamel) baked paint is a kind of modern technology, the use of paint and then use the high temperature heat quickly paint will penetrate the surface of the material was baked, baked paint device specified by a customer should be the equipment end of the use of poison gas recovery equipment will be toxic substances quickly to accept to be ruled out. This process allows the paint is not easy to fade off, partly because of harmful substances of the paint already baked paint process is absorbed exclude, so in the future use will not be released into the atmosphere, the people and the environment can be reduced to a minimum.


2: phosphating (phosphatizing) is a chemical and electrochemical reactions is the formation of the phosphate chemical conversion coating process, the formation of phosphate conversion coating is called a phosphate film. The aim is to give the base metal to provide protection to prevent the metal is corrupt to a certain extent. For the primer before painting, powder coating or electrophoresis, to improve the adhesion and anti-corrosion ability.


3: (chromating) chromate solution and metal effects on the surface of the trivalent or hexavalent chromium layer process used for the processing of zinc, aluminum, magnesium alloy and the appearance of decorative surface treatment, such as : car handle, sanitary products, construction (decorative) metal, door and window handles. The same time, the chromium can be divided into the following categories (color) sand chrome, matt chrome,Shiny chrome, pearl chrome (painted pearl chrome), the ancient green (antique brass) and so on.

4: electrostatic powder (electrostatic powder spraying) in order to avoid the paint defects, the introduction of the electrostatic powder coating technology. Electrostatic powder coating is a new technology, the principle is the high-voltage electrostatic spray resin powder paste on the base metal surface, forming a protective film. This layer of protective film itself is environmentally safe, In addition, the protective film can also be sealed to the metal surface of the substrate to prevent the release of harmful objects. This new type of "solid paint" instead of liquid paint, which is characterized by the release of formaldehyde and other harmful gases can also be recycled. The same time, it can produce rich, saturated colors can be sprayed to any pattern, is very suitable to use.

Zinc Casting Surface Finished

Zinc Casting Surface Finished, Die Casting Surface Finish, Surface Finished Casting Parts

Ningbo Zhenhai Xinxie Machinery Co.LTD , https://www.xinxie-diecasting.com