At the construction site, we often see various high-altitude operations vehicles carrying workers to perform operations. It is both breathtaking and exciting. Now think of any problems with the aerial car accessories that can cause great danger to the staff, so be extra careful when choosing accessories. Then what are the precautions for the selection of parts for the high-altitude truck ? ! I. Observing the integrity of the assembly components and the presence or absence of missing parts: The assembly parts manufactured by well-established and regular manufacturers can make the components better assembled and the machine can work smoothly. Loss of small parts on some assembly components may affect the overall machine's working status and work efficiency. Second, see the specifications and models of accessories and the machine is consistent: Basically all of the high-altitude truck accessories are strictly specified models and technical parameters. In the process of selecting accessories, it is necessary to verify the relevant parameters so as to avoid buying the wrong parts to cause greater losses or leaks during the operation of the machine. Third, observe the parts of the surface of the wear and corrosion: Generally the surface of the parts that are matched with each other is smooth, if there are signs of wear or rust or old paint is found on the painted surface, then the waste parts may be assembled, shoddy, At this point, you should replace the parts to ensure the quality of the selected parts. 4. Observe the assembly mark on the surface of the accessories: In order to facilitate the installation of accessories, the surface of most parts is engraved with clear and clear assembly marks. If the surface of the accessories you purchase is not available, it will cause great difficulties for the assembly and even installation. Errors affect machine operation. 5. Observe that the hardness of the surface of the fitting is consistent with the required accessories: When the new fitting is selected according to the required hardness of the fitting, a simple hardness test is required to determine whether the surface hardness of the fitting meets the requirements. The surface of the hacksaw can be used to test the fitting surface to determine if its hardness meets the requirements. However, it must not damage the working surface of the fitting during the test. In addition, it is necessary to pay attention to whether the protective surface of the accessories is intact, whether loose parts are glued or not, and how flexible the rotating parts are. Understand the above knowledge, I believe we have more understanding of the choice of high-altitude truck accessories. According to the above requirements to select observation accessories, I believe that you will certainly select the right accessories to make your own aerial work more smoothly.
Granulation Equipment:
Our dry granulators/roller granulator are suitable for granulating and pelleting dry material whose humidity is below 10%.
1.1 Fertilizers: potassium sulphate (SOP), NPK compound fertilizers etc.
1.2 Chemical material: snow melt agent, antioxidant, fire retardant, cement retarder etc.
1.3 Construction material: all kinds of gypsum, e.g. desulfurized gypsum, phosphogysum etc. Gypsum pelletizer is our featured machine.
2. Output, size and shape
2.1 Small size and irregular shape: min.output is 200 kgs/h and max. is 4500 kgs/h, granules size is on request.
2.2 Big size and oval shape: min. output is 3,000 kgs/h and max. is 12,000 kgs/h, pellet size is on request.
Please note that size is bigger, output is higher.
3. Granulating theory
Two rollers rotate in reverse, materials between rollers are extruded. They are not smooth surface rollers.
By using the crystallization water in the materials, the equipment can directly make the powder materials into the grains. It is a kind of new equipment. The structure is rational. The machine is stable and reliable in the performance and easy in maintenance.
Dry Roller Granulator, Dry Roller Pressing Granulator, Dry Roller Granulation Machine Changzhou Ruide Drying Engineering Technology Co., Ltd , http://www.rddryer.com
The grains to be made can be used for pressed pills, instant soluble agent, capsule and etc. The machine is mainly used for the grain making in pharmacy, food, chemical and other industries and it is suitable for the grain making for which the wet method can not settle it.