April 28, 2024

Extend battery life of battery car, how to maintain it is 诀窍

First, "every day, use the car, charge every day."

Lead-acid batteries have no memory, so the rapid reduction of capacity is mainly due to some reasons such as battery vulcanization and “water loss” and “debt loss”. The battery is most afraid of “defective power” undervoltage, battery often “depleted”, battery pole The board is extremely vulnerable. In reality, up to 70% of the electric vehicle battery capacity is reduced by the strong current (starting current) when the electrode plate is discharged (electrical motor is particularly obvious), and the electrode plate strain is a physical damage of the battery. The damage cannot be repaired. Therefore, "every day with the car, every day charging", to ensure that the battery has sufficient voltage at any time becomes inevitable.

Second, add distilled water at regular intervals.

Users generally believe that maintenance-free batteries do not need to add water, in fact, this statement is wrong. Maintenance-free batteries generate heat during charging and high-current discharge. If there is heat, water will evaporate. Although the process of water evaporation is very slow, the amount of accumulated water evaporation cannot be ignored for a long time. Therefore, the battery should be replenished once every 6 months or so, so that the service life of the battery will be prolonged.

Third, the electric car starts to use force.

The starting current of the electric vehicle is very large, especially the electric motor of the high-power motor, and the starting current is larger. The high current is very harmful to the battery plate. The best way is to start the electric car before riding, just like riding a bicycle. Of course, many electric motorcycles do not have a riding device, and there is no way.

4. Discharge the battery once a quarter.

After the battery is used for a period of time, some active substances will inevitably sink. If the active substances are not activated in time, it will inevitably have some impact on the capacity of the battery. Therefore, when using the electric vehicle frequently, it is necessary to make the battery every season. Depth discharge once.

5. Always observe the quality of the charger.

The charging process of the new battery is generally 6-8 hours. When the battery is fully charged, the charger will light green. If the charging time is too long, check if the charger voltage protection device is damaged. If it is damaged, you need to change the charger in time. Otherwise it is easy to charge the battery. In addition, the charger should not buy a fast charger, and fast charging also has damage to the battery plate.

6. When charging the battery for a long time, charge the battery at least once a month.

The purpose of this is to prevent the battery from being placed for too long and causing the battery to vulcanize and "deplete".

Seven, to prevent battery explosion.

Explosive exposure will increase the temperature of the battery, so be careful.

8. Use the battery protector as soon as possible.

The battery protector is also a pulse generator. The pulse is uninterrupted to eliminate the vulcanization of the battery, so that the plate is always kept "clean", thereby achieving the effect of prolonging the service life of the battery, but it has little effect on the damage of the battery plate by the large current.

T Shirt Printer

We are manufacture in Shenzhen China.


Do you want to own a unique T-shirt?

Do you want to DIY a T-shirt special for your kids, your lover and your family?

Do you want to open a workshop for the T-shirt printing business?

Imagination is unlimited; Gateway can give you a complete solution for customizing your t-shirts.

T shirt printer are using 5 color eco environmental ink (C,M,Y,K,W). Printing size is 33*60cm,max printing height is 17cm,max resolution is 5760*1440dpi.With our T-shirt printer, you can print any kind of artwork or photos on your own T-shirts, no mater White or Black shirts.

The operation is very simple; You just put the T-shirt on our t shirt jig/adapter.


t shirt printer

Name
T shirt printer
Print head
DX5
Printer size
33*43cm(33*60cm)
Printing speed
A4 photo/111s
Printng resolution
5760*1440dpi
Nozzles
90*6=540
Interface
USB2.0
Net weight/Gross weight
55Kg/60Kg
Printer size
750*630*510mm
Height adjustment
Automatic
Working power
110V/220V 50/60Hz 30-75W
Operation system
Windows 7/XP/2000/Vista etc
Temperature
5-35o



T Shirt Printer,Digital T Shirt Printer,T Shirt Printing Machine,Black T Shirt Printer,A3 T Shirt Printer

Shenzhen Refinecolor Technology Co., LTD. , https://www.szuvflatbedprinter.com