The main thing of driving flat-bed semi-trailers is to be able to hold on to themselves, because this kind of vehicle is not the same as a sedan, don't think that you have a few years of car driving experience to feel particularly remarkable, you can completely control the semi-trailer, in the operation It is extremely inappropriate for a car to be carried on a flatbed semi-trailer. So what should we pay attention to when driving flatbed semi-trailers? 1, the same is the long-distance transport, for flat-panel semi-trailers and one vehicle choice, more people will still prefer the flat-type semi-trailer, although the integrated car will be more economical, but the same distance on the cost, semi-trailer and more Pulling more than one is more rewarding. In the process of driving the flatbed semi-trailer, since it is different from the one-piece vehicle, the camber is relatively large when making a turn. It must be noted that the position of the flatbed semi-trailer is at least a little more than a meter away from the main vehicle when turning. Only after the distance is controlled, can it be more convenient when it is necessary to reverse the vehicle. . 2. When a flatbed semi-trailer needs to pass, even after it has been successful, it should not immediately return to the lane, because its own vehicle length and size are relatively large, so it is necessary to leave a suitable one. distance. Flat-type semi-trailer overtaking is the need for very skilled skills, after the overtaking must be timely observation of the situation of the rearview mirror, waiting in the rearview mirror is already visible after the rear part of the car before returning to the driving Road. What needs to be said here is that the flat-type semi-trailer itself is a big obstacle, and in high-speed, national roads, urban areas and other roads, please do not arbitrarily overtake and avoid some accidental traffic accidents. 3, Snowy days, flat-panel semi-trailer driving in rain and snow weather conditions, remember not to use rapid acceleration or emergency brake. And in such road conditions, the flat-bed semi-trailer must not use the closed-air brake, which will directly cause the drive wheel to stop running, and the semi-trailer will lose control after the flame-out condition occurs. This is a very dangerous operation method! Use it with caution! 4. The reversing skills of the flatbed semi-trailer are accumulated day after day. If you want to master the reversing skills of the flatbed semi-trailer, you must have at least six months of proficiency to master it. In the process of reversing the vehicle, don't always turn repeatedly, this is a bad operating habit, and it will also make it difficult for you to find out where the flatbed semi-trailer is currently located. When the oil can be boomed, the speed of the vehicle's engine can be balanced with the speed of the driving, and the ability to increase or decrease the gear can be obtained without using the clutch. Ningbo Rainbow Machinery committed to R&D and production of plastic Pet Preform Injection Molding Machine for many years. We design and produce PET preform injection moldng machine accoring to charactaristic of PET material and PET preform mould based on our many years experience. The machine equipped with large 25:1 L/D ratio screw and barrels specially for PET preform, saperate pressurize system and special clamping unit and injection unit for PET preform molding. Also, we can provide PET preform mould and complete Auxiliary Equipment, such as PET Dehumidifier , hopper dyer, Water Chiller , Vacuum Autoloader , Plastic Mixer , plastic crushers,PET Preform Injection Machine etc. PET Preform Injection Molding Machine Pet Preform Injection Molding Machine,Pet Plastic Injection Machine,Pet Preform Making Machine,Pet Plastic Injection Molding Machine,PET Preform Injection Machine Ningbo Rainbow Plastics Machinery Co., Ltd. , https://www.injection-machine.com
