Many car owners are sloppy, and many people forget to close the car window or forget to turn off the car after using the car. This kind of thing usually happens from time to time, especially for new car owners who are just driving. But everyone knows that if there is no window in the rain, it is very likely that the car will go in the rain, especially when the rain is relatively large. The following small series for everyone to talk about how to do rain water inside the car. 1. When driving the door, you must not use the remote control directly. Do not let the car appear to be energized after the water is in the car. Otherwise, many electrical equipment may have a short circuit. Therefore, the mechanical key should be used when driving the door, so that it is safer to drive the door. In order not to cause other situations, the mechanical key must be used without damaging the circuit inside the car. 2. Check the electronic equipment inside the car. Although the car is generally waterproof, it is necessary to check the electronic components in order to avoid short circuit. Don't open it first, first test it with something deliberately sucked out, if there is no problem, just let it dry, or hammer it with a hair dryer, etc., don't let it appear to return to the tide. If you find water when you check it, you must go to the repair shop to find a professional person. 3, the things inside the car are taken outside, the carpet in the car is generally more tide. Use a vacuum cleaner to absorb water, and all the seats in the car need to be dried. Otherwise, it will be moldy, and bacteria will pollute the air inside the car. If it takes a long time, it will have a musty smell. Be sure to apply protective equipment to the seat of the car after cleaning the water, and the instrument panel of the car should be coated with a protective agent. 4, open the car sunroof under the sun to the car to dry, mainly to give the car a cool and then sterilize the car, be sure to absorb the water inside the car. How to do the water in the rainy day will be finished for everyone, if there is such a thing in the future, in order to ensure the normal use of the car must be done according to Xiaobian. What other good methods you can share with Xiaobian. In fact, many of the cars nowadays are relatively high-tech. Generally, after getting off the car, the car will automatically close the window, lock the door, and do not need people to operate, but for the cheaper car, you have to manage it yourself. So everyone has to be a little longer.
The final product will be 40%-45% tire oil (fuel oil), carbon black and 35% carbon black, 10% steel and another 5-10% recycled gas (CH4-C4H10). Small Scale Plastic Recycling Plant Tyre Pyrolysis Plants,Waste Pyrolysis Solutions,Waste Pyrolysis Equipment,Reactor Plate Pyrolysis to Oil Machine Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com
The main process is to pyrolyze the tire into oil and gas by directly heating the reactor;
The condenser or cooling tube will cool the gas to a liquid oil with the aid of circulating water;
Then, the remaining gas that cannot be cooled into liquid oil is recycled to the reactor heating system; after the oil and gas is completely discharged, the reactor is stopped to be cooled, and the reactor below 70 degrees is cooled; then the door can be automatically opened and the carbon black can be discharged. .
The capacity of each batch of products ranges from 5 tons to 20 tons.
LN-2200-6000 capacity 5-6 tons
LN-2200-6600 has a capacity of 7-8 tons
LN-2200-8000 has a capacity of 9-10ton
LN-2600-6600 has a capacity of 10-12ton
LN-2600-8000 has a capacity of 12-14ton
LN-2800-6000 capacity is 10-12ton
LN-2800-6600 has a capacity of 12-14 tons
LN-2800-8000 capacity is 15-20ton
If cut into small pieces, it can handle more.