cause of issue: Method of exclusion:
Magnetic lifter
Introduction:
Magnetic Lifters have strong magnetic path made by strong NdFeB magnetic material which supply permanent power. Our permanent magnetic lifters are made use of in a variety of industries. Our permanent magnetic lifters can hoist iron, steel blocks, cylinder and others and provide a quick and convenient method of loading, unloading, and moving. Our permanent magnetic lifters are the most ideal lifting equipment for factories, warehouses, docks and transportation.
Manual Magnetic Lifter Features:
• Use to lift and transport steel and iron for factories, docks, warehouses, transportation and more.
• Turning the manual handle activates or turns off the magnet.
• Strong attraction gives this tool a powerful lifting ability while it`s small size and light weight makes it easy and safe to operate. Effective for long periods with no need for a power supply.
• The safe coefficient of magnet lifter is 3.5.
Specifications:
Type
Rated Load/kg
Max Breakaway
Size(mm)
Net Weight(kg)
L
B
H
R
PML-100
100
300
123
62
67
140
3
PML-400
400
1200
195
95
92
160
9
PML-600
600
1800
246
120
115
220
20
PML-1000
1000
3000
298
153
135
250
36
PML-2000
2000
5000
395
172
165
350
68
PML-3000
3000
7500
480
175
165
350
80
PML-4000
4000
10500
560
175
165
360
109
PML-5000
5000
12500
570
230
215
680
192
PML-6000
6000
15000
780
230
215
720
218
Features:
Zero electricity required
Forged hook for high mechanical strength and durability
Precision machined assembly block in single piece to enhance efficiency
Designed for safety and light weight
Fool proof locking system with an easy to use "on" and "off" lever
3 times rated capacity factor of safety to meet the safety standards as per international standards for under the hook devices
Test certificate for safety factor from government approved third party
No Maintenance and Operating cost
No damage to the work piece being lifted
Very Compact
Our Services
1.Client
We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.
2. People
We work as a team and treat each other with respect. Our solid, capable and knowledgeable team is valued as the greatest asset and an integral part of the business.
3. Product
Our products are of HIGH quality standards and always come with certificate of compliance by the manufacturers.
4. Performance
We aim to achieve high level of performance and satisfaction to both our client and people, which include delivering high quality services and treating people with integrity.
5. Free sample and OEM service
We can provide free samples to you and we also have OEM service, we can put your logo on the label and the information you need on the webbing too.
Magnetic Lifter,Permanent Magnet Lifter,Magnetic Hand Lifter,Magnetic Load Lifter Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , https://www.liftingriggings.com
(1) Sliding bearing bush scraping does not meet the requirements.
(2) bearing clearance is too small.
(3) two improper lubricants (too much or too little) or deterioration.
(4) bearing equipment is not correct.
(5) Insufficient cooling water or interruption.
(6) bearing wear or loose.
(7) shaft bending.
(8) oil ring deformation, rotation is not working or can not rotate, with no oil.
(9) Shaft and motor shaft are not concentric.
(10) bushings Babbitt off.
(1) re-scratch the bearing, is 3-5 points per square centimeter, the contact surface of 70 /% or more, a good tank.
(2) re-adjust the bearing clearance or scratch research.
(3) adjust the oil volume, two-thirds of the volume.
(4) Check the bearing assembly as required to eliminate unmet requirements.
(5) Check and clean the cooling water pipe to give enough cooling water.
(6) Check the bearing, adjust the gland, the Department will wear the latest scratch scraping and adjust the gap.
(7) Check, straighten or replace the pump shaft, so that the maximum curvature of less than 0.03mm.
(8) Check the ovality of the oil ring, correct or replace the new oil ring.
(9) Measurement and adjustment of centrifugal pump unit concentricity, so as to achieve the standard requirements.
(10) selected standard Babbitt, re-hang tile, processing. Scraping bearings.
