Medical mask manufacturer
medical mask manufacturer,producingmask,medical
mask,surgical mask,KN95 mask,Disposable Mask,children mask.
Medical mask features:high-quality
non-wovensurface, pleated mask, adjustable size; melt-blown non-woven
interlayer,filtering non-oily particles
The main performance of the Medical mask It is
composedof non-woven fabric, meltblown fabric, nose clip, elastic band and
earrings, andthe air permeability is not less than0.1m/s; the filtration
efficiency of non-oilyparticles is not less than 20%; it is sterilized by
ethylene oxide Medical mask
Coronavirus
Anti Dust Mask,Disposable Dust Mask,Anti Dust Disposable Face Mask,Protective Medical Surgical Disposable Face Mask BIQIAO MEDICAL TECHNOLOGY(HENAN) CO.,LTD , https://www.medical-technology.net
Under what circumstances should the detonation kit be used to detonate, and how is the location of the detonation kit determined?
In the medium-deep hole blasting, low-sensitivity explosives such as granular ammonium explosives should be detonated with a primer.
Initiation kits commonly used explosive rock roll # 2 packs of tied up, there is a the RDX and TNT or RDX explosive detonation kits like composition (or from bomb), the former is used for small and medium Mines, the latter are mostly used for deep hole blasting in large open pit mines.
When deep-hole blasting in open pit mines, the primer is generally placed at the bottom of the hole, and the detonation wave is detonated in the opposite direction to the hole at the bottom of the hole. When the blasthole passes through several different rock formations, the primer should be placed in the rock layer that is most difficult to blast. In the specific case of using low-sensitivity slurry explosives, a common detonating tube is used to detonate, and in order to prevent the explosive from being crushed, the detonation kit should be placed on the top to detonate.
In deep-hole blasting in open pit mines, double-packs are sometimes used to detonate, that is, a drug pack is placed at the top and bottom, which is beneficial to improve the blasting quality of the rock.