
Copper shavings, chips, turnings, filings, cuttings powder, granules , debris and copper meter are valuable to deal with.  A copper briquetting machine from ShengBo can turn your scrap copper into compressed blocks that are easier to handle, store, transport and can be sold for recycling. This briquetting system can also squeeze out fluids from the chips with no additive.
We recommend you a fully-automatic horizontal copper briquetting line, with conveyor, bunker, elevator, etc. Our Y83W horizontal briquette machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
5) high output.
Â
model | Y83W-3600 |
nominal force | 3600kn |
briquette diameter | D100 (customized) |
briquette density | ≥ 5.5t/m³ |
briquette weight | 3.5~5kg |
productivity | 3~4block/min |
output in one shift | 5~7t/8h |
total power | 37kw |
machine weight | about 7.5ton |
overall dimension | host machine: 4000*1850*2150mm oil tank: 1680*1500*1260mm |





Â
:D

Copper shavings, chips, turnings, filings, cuttings powder, granules , debris and copper meter are valuable to deal with.  A copper briquetting machine from ShengBo can turn your scrap copper into compressed blocks that are easier to handle, store, transport and can be sold for recycling. This briquetting system can also squeeze out fluids from the chips with no additive.
We recommend you a fully-automatic horizontal copper briquetting line, with conveyor, bunker, elevator, etc. Our Y83W horizontal briquette machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
5) high output.
Â
model | Y83W-3600 |
nominal force | 3600kn |
briquette diameter | D100 (customized) |
briquette density | ≥ 5.5t/m³ |
briquette weight | 3.5~5kg |
productivity | 3~4block/min |
output in one shift | 5~7t/8h |
total power | 37kw |
machine weight | about 7.5ton |
overall dimension | host machine: 4000*1850*2150mm oil tank: 1680*1500*1260mm |





Â
:D
Ammonium sulphate is an excellent Nitrogen Fertilizer raw material and widely used as seed fertilizer,top dress and base fertilzier that is suitable for general soils and crops.It can provides ans equal balance of nitrogen and sulphur and help the crop grow vigorously,improve fruit quality and yield,enhance crop resistance to disasters.
Ammonium Sulphate is suitable for general crops and soils,but there`re still some points to note.
1. Cannot be contacted/mixed with alkaline substances
2. Cannot be applied on the same farmland for a long time
3. Not suitable for use on acidic soils
Ammonium Sulphate,Ammonium Sulphate Granular,Ammonium Sulphate Crystal,Ammonium Sulphate Powder
Hebei Woldi Trading Co.,LTD , https://www.woldiexport.com