Galvanized Steel Coil products are mainly used in construction, light industry, automobile, agriculture, animal husbandry, fishery and commercial industries. Among them, the construction industry is mainly used to manufacture anti-corrosion industrial and civil building roof panels, roof grilles, etc.; the light industry industry uses it to manufacture household appliance shells, civil chimneys, kitchen utensils, etc., and the automotive industry is mainly used to manufacture corrosion-resistant parts for cars, etc. ; Agriculture, animal husbandry and fishery are mainly used for food storage and transportation, meat and aquatic products freezing processing tools, etc.; Galvanized Steel Coil,Prepainted Galvanized Steel Coil,PPGI,Galvanised Steel Coils,Steel Coils Shandong Rizhaoxin Metal Products Co., Ltd. , https://www.rizhaoxinsteel.com
Installation precautions for pure water smart turbine flowmeter
Installation precautions for pure water smart turbine flowmeter
The smart turbine flowmeter is installed to work properly.
The installation precautions for intelligent turbine flowmeters are as follows:
1. Pay attention to the downstream installation when installing, that is, the direction of installation and the direction of liquid flow are the same, which is reflected by the direction of flow and the direction of the sensing arrow on the sensor.
2, the installation should take into account the upstream and downstream liquid flow rate, so the upstream access to the pipe mouth should be slightly larger, generally will require more than 20dn, the downstream pipe can also be too small, at least to ensure the normal circulation of liquid, need to be greater than 5dn
3. Install the sensor away from possible interference sources, such as external magnetic fields, or simply filter the external interference and add a protective cover to the sensor.
4, the sensor should not be installed in the open air, easy to enter the water, if you can not avoid the need for open-air installation, you need to waterproof the sensor plug
5. The data receiving line of the sensor should be selected according to the situation of the receiving end, so that the data can be received comprehensively.