Model NO.: STW
Customized: Customized
Advantage: Simple Structure
Condition: New
Suitable Material: Q235,Q345,G550 for Gi,PPGI,Gl,PPGL
Suitable Thickness: 0.4mm~0.7mm
Machine Type: Cold Roll Forming Machine
Final Product: Metal Tile,Roof Tile,Corrugated Sheet,Purlin
Main Motor Power: 3kw
Control System: Mitsibishi PLC
Forming Speed: 16~20m/Min or According to Customer′s Requirment
Drive Way: Chain or Gear Box
Delivery Time: 30 Days Finished and 10 Days More to Test
transportation: by Sea or Train
Trademark: STW
Transport Package: Sea Package
Specification: CE
Origin: China Mainland
HS Code: 8845210
Model NO.: STW
Customized: Customized
Advantage: Simple Structure
Condition: New
Suitable Material: Q235,Q345,G550 for Gi,PPGI,Gl,PPGL
Suitable Thickness: 0.4mm~0.7mm
Machine Type: Cold Roll Forming Machine
Final Product: Metal Tile,Roof Tile,Corrugated Sheet,Purlin
Main Motor Power: 3kw
Control System: Mitsibishi PLC
Forming Speed: 16~20m/Min or According to Customer′s Requirment
Drive Way: Chain or Gear Box
Delivery Time: 30 Days Finished and 10 Days More to Test
transportation: by Sea or Train
Trademark: STW
Transport Package: Sea Package
Specification: CE
Origin: China Mainland
HS Code: 8845210
Professional Expert Manufacturer of roof sheet making machine| No. |       item | Parameter(all is subject to our final design) | |
| 1 Â |
Suitable raw material | Type | Common galvanized & pre-painted steel |
| Yield strength | 235MPa(or other high strength steel) | ||
| Thickness(mm) | 0.4-0.7 | ||
| width(mm) | According to final design | ||
| 2 | Manual uncoiler's capacity | Max.5tons | |
| 3 | Forming speed(m/min) | About 18-20m/min | |
| 4 | Main motor power(KW) | 7.5kw | |
| 5 | Hydraulic power(KW) | 3kw | |
| 6 | Forming roller groups | Around19-20 groups | |
| 7 | Raw material of forming roller | High quality No.45 steel | |
| 8 | Raw material of cutting blade | Cr12mould steel with quenched treatment | |
| 9 | controlling system | Mitsubishi PLC& converter | |
| 10 | Suitable industrial voltage |  According to your special requirement | |
| 11 | Machine dimensions(L*W*H) | 6.8m×1.8m×1.52m | |
| 12 | Machine weight | About 9-10tons | |
Components:
- The uncoiler and its base
- Coil sheet guiding and adjusting equipment
- Film covered device
- Main roll forming system
- Post- Cutting device
- Hydraulic station
- PLC control System
- Support table
Material of Roll former system:
- Roller: High grade No. 45 forged steel, plated hard chromed on the surface of rollers with thickness 0.05mm.
- Active shaft material: High grade No. 45 carbon wrought steel at diameter 75mm.
- Cutting blade: Cr12 mould steel with quenched treatment.
Working flow:
Decoiling the sheet- - - Guiding the sheet- - - Covering the film- - - Roll forming- - - Measuring the length- - - Cutting the panel- - - Panels to the supporter.
Our machine's warranty time:
We offer 12 months quality grantee time starting from the date of delivery. When delivery, we will ship a set of wearing parts for free; Within the warranty period, maintenance of equipments and replacement of parts of equipment are charge-free.
After-sale service:
We offer sale after service for life. The machine will be inspected well in our workshop before delivery. We will send one technician to your factory to install the machine if you need extra installation, training service; The seller should arrange offer technical back-up and assign a technician people to the buyer's part. Professional Expert Manufacturer of roof sheet making machine
| No. |       item | Parameter(all is subject to our final design) | |
| 1 Â |
Suitable raw material | Type | Common galvanized & pre-painted steel |
| Yield strength | 235MPa(or other high strength steel) | ||
| Thickness(mm) | 0.4-0.7 | ||
| width(mm) | According to final design | ||
| 2 | Manual uncoiler's capacity | Max.5tons | |
| 3 | Forming speed(m/min) | About 18-20m/min | |
| 4 | Main motor power(KW) | 7.5kw | |
| 5 | Hydraulic power(KW) | 3kw | |
| 6 | Forming roller groups | Around19-20 groups | |
| 7 | Raw material of forming roller | High quality No.45 steel | |
| 8 | Raw material of cutting blade | Cr12mould steel with quenched treatment | |
| 9 | controlling system | Mitsubishi PLC& converter | |
| 10 | Suitable industrial voltage |  According to your special requirement | |
| 11 | Machine dimensions(L*W*H) | 6.8m×1.8m×1.52m | |
| 12 | Machine weight | About 9-10tons | |
Components:
- The uncoiler and its base
- Coil sheet guiding and adjusting equipment
- Film covered device
- Main roll forming system
- Post- Cutting device
- Hydraulic station
- PLC control System
- Support table
Material of Roll former system:
- Roller: High grade No. 45 forged steel, plated hard chromed on the surface of rollers with thickness 0.05mm.
- Active shaft material: High grade No. 45 carbon wrought steel at diameter 75mm.
- Cutting blade: Cr12 mould steel with quenched treatment.
Working flow:
Decoiling the sheet- - - Guiding the sheet- - - Covering the film- - - Roll forming- - - Measuring the length- - - Cutting the panel- - - Panels to the supporter.
Our machine's warranty time:
We offer 12 months quality grantee time starting from the date of delivery. When delivery, we will ship a set of wearing parts for free; Within the warranty period, maintenance of equipments and replacement of parts of equipment are charge-free.
After-sale service:
We offer sale after service for life. The machine will be inspected well in our workshop before delivery. We will send one technician to your factory to install the machine if you need extra installation, training service; The seller should arrange offer technical back-up and assign a technician people to the buyer's part.
HuiJie Steel Pipe manufacturing cold drawn seamless pipes which are wide application for ball and roller bearing, automotive industry,Machinery,construction,oil and gas drill pipes,boiler and heat-exchanger tubes,engineering mechinery,mining and rock
drilling pipes.We have 20 years producing and exporting experience for the world market,specially producing DIN,EN,ASTM,JIS,
BS,GB,GOST,ISO etc international steel pipes and tubes standard.
Our sizes range tubing diameter from 6mm till 329mm,tubes wall thickness from 0.8-30mm,Max length 12meters.
We have 28 cold rolling pilgers and 25 cold drawn lines,the monthly output 7,000tons,about 22% tubes exported for global customers.
Our products including:CDW cold drawn welded steel tubes,ERW steel tubes,CDS cold drawn seamless steel pipes,Alloy steel tubing,
100Cr6/52100 Bearing tubes,wire-line drill pipes BQ,NQ,HQ,PQ,DOM round tubing,High precision tubing,boiler and exchangers tubes.
Cold Drawn Steel Tubes,Cold Drawn Seamless Tube,Cold Drawn Seamless Pipes,Cold Drawn Seamless Steel Tube
Ningbo Huijie Steel Pipe Manufacturing Co.,Ltd , https://www.hjbearingtube.com