Spandex
Warping Machine
Spandex warping machine also called spandex yarn warping machine; elastic yarn warping machine.
A-ZEN spandex warping machine AZE318 with
vertical creel is driven by 5 sets high performance servo motors and adopted
with advanced precisive laser to measure distance so that spandex warping is
more stable, well equipped with and easier to operate. It is suitable for
warping all kinds of spandex, especially for requirement of knitting high
quality elastic textiles.
Technical Data:
Warp Line Speed: 100-600m/min;
Beam Size: Φ21"*21";
Warping
ends: According to customers` demand;
Pre-drafting:
0-200%; Final Draft: 15-100%;
Brake
time less than 0.6 s, the deviation of stop synchronization is less than 3%;
Creel
Capacity: 616, 700, 728, 784, 792, 896, etc.
Servo
Motor Power: Warper head power 13.2KW, Warper Head Tension Roller 2.9KW, Draft
Roller 4.6KW, Creel: 2*6.9KW;
Main
Motor: 10KW AC frequency conversion control;
Control
Mode: Computerized real-time control, and user-friendly operation interface.
Spandex Warping Machine,Elastic,Beam Warping Machine, Yarn, Computerized Split Yarn Warping Machine CHANGHZOU A-ZEN TEXTILE TECHNOLOGY CO.,LTD , https://www.tricotmachinery.com
Basic processing stages of punching die:
Draw-pierce&burring-reflare-edge trim-pilot-row slit-feeding-cut off
Special stages under customers' requirements:
Louver, surface slit, notching, heater holes, sin-wave, etc.
Matching equipment: Fin press
Fin hole diameter range: 5-25.4mm
Fin die rows range: 4-60rows
No. Of progressions and distance between rows and hoels in row: According to customers' requirements
Thickness range of material(aluminium): 0.09-0.3mm
Collar height range: 1.2-10mm
Type of evaporative oil: AF-2A, RF-530, Henkel Magnus L67, etc
Package of fin die
Spare parts package:
China-Air-Conditioner-Heat-Exchanger-Progressive-Fin-Punching-Die
Using field: Punching die for heat exchanger of air-conditioner