25.4mm Stainless Steel Sanitary Mixproof Valve with SMC Solenoid valve

Concept
SMP-BC is a sanitary pneumatic seat valve,designed for safety and leak detection when two different products flow through only one valve.The valve is often used as a part in CIP return lines or other systerms not experiancing pressure spikes offering leakage detection for greater safety.

Working principle
SMP-BC is remote-controlled by means of compressed air.The valve is a normally closed (NC) valve.
The valve is fitted with two small pneumatic normally(NO) valves,a detecting valve and a CIP - valve.
The valve plug(the upper plug in a change-over valve) has two seals,forming a leakage chamber under atmospheric pressure between them.Leaking products flows into the leakage chamber and is discharged through the detecting valve.SMP-BC can be cleaned by CIP by supplying compressed air to the actuator(see fig 1).During cleaning of the valve,flow pattern against the closing direction of the valve plug makes SMP-BC insensitive to water hammer.

Technical data 
  25.4mm Stainless Steel Sanitary Mixproof Valve with SMC Solenoid valve

Concept
SMP-BC is a sanitary pneumatic seat valve,designed for safety and leak detection when two different products flow through only one valve.The valve is often used as a part in CIP return lines or other systerms not experiancing pressure spikes offering leakage detection for greater safety.

Working principle
SMP-BC is remote-controlled by means of compressed air.The valve is a normally closed (NC) valve.
The valve is fitted with two small pneumatic normally(NO) valves,a detecting valve and a CIP - valve.
The valve plug(the upper plug in a change-over valve) has two seals,forming a leakage chamber under atmospheric pressure between them.Leaking products flows into the leakage chamber and is discharged through the detecting valve.SMP-BC can be cleaned by CIP by supplying compressed air to the actuator(see fig 1).During cleaning of the valve,flow pattern against the closing direction of the valve plug makes SMP-BC insensitive to water hammer.

Technical data 
 

Niobium Carbide Welding Wire

Niobium Carbide Welding Wire Produces Super Hard Overlay As The Best Wear Solution.

We offer welding wires for low, medium and high alloy hardfacing, for mild steel fabrications, Diameters range from 1.2 mm to 4.0 mm, using our own manufacturing technology. In addition to cored wires, our range of consumables includes tubular welding electrodes.

HP Welding manufactures an extensive range of flux cored and metal cored hardfacing consumables. We offer welding wires for low, medium and high alloy hardfacing, which provide the ultimate protection against various types of wear, including abrasion, erosion, impact, mechanical fatigue, and more.

Our range of hardfacing welding wires dedicated to increasing abrasion resistance. Flux cored wires and metal cored wires suitable for increasing wear resistance of parts such as screw conveyors, fans, equipment used in agriculture & mining, grinding mills, vertical mills, screws, blades, ventilators and more.

HP Welding manufactures a range of flux cored welding wire and metal cored welding wire for different cladding applications to increase wear resistance. With our cladding wires, you will prevent wear problems from abrasion, impact, temperature, corrosion and errosion and increase the service life of your parts.

HP Welding wire could make the ultra-hard deposit offering extremely high resistance to abrasion under high stresses and moderate impacts

HP Welding wire can be well applied for screw conveyors, riddles for hot materials, fans, crushers, etc.

HP Welding wire forms the ultra-hard deposit offering highest resistance to abrasion which contains boron carbides of extreme hardness

Niobium Carbide Welding Wire,ESAB Welding Wire,FCAW Welding Wire, Nb Flux Cored Welding Wire,Open Arc Welding Wire

HuiFeng Wear Resistant Group , https://www.hpwearsolution.com