- Model NO.: w beam
- Thickness of Raw Material: 1.8-3mm/4mm
- Power of Cutting: 7.5kw
- Material of Roller: Cr12 with Quenching
- Color of Machine: Blue or as Your Request
- Material or Shaft: Bearing Steel
- Transport Package: Covered with Plastic Films
- Origin: China
- Suitable Material to Produce: Galvanized Steel
- Main Power of Machine: 22kw
- Material of Cutter: Cr12 with Heat Treatment
- Dricing of Machine: Gear&Chain or Universal Joint
- Diameter of Shaft: 100mm
- Trademark: JCX OR OEM ODM
- Specification: 310 W beam
- HS Code: 84552210
High quality good price Chine Wholesale 2wave 3 wave W beam guardrail roll forming machine for road
                               Â
Â
                                   Â
 Â
|
Technical Datas Roll Forming Machine | ||
|
1 |
Material Width |
495mm |
|
2 |
Effective Width |
310mm |
|
3 |
Thickness of Coil |
1.8-3mm / 4mm |
|
4 |
Application |
Highway Guardrail / craash barrier |
|
5 |
Estimated Dimension |
11000mmX1500mmX1300mm |
|
6 |
Total Weight |
10Â Tons |
|
7 |
Main Power |
30Â KW |
|
8 |
Decoiler |
Manual or Hydraulic Decoiler |
|
9 |
Inner Diameter |
508mm |
|
10 |
Outer Diameter |
1200mm |
|
11 |
Loading Weight |
5T |
|
12 |
Forming Speed |
0-15m/min |
|
13 |
Forming Station |
12-15 |
|
14 |
Bracket |
Welded with 36 # I-steel |
|
15 |
Material of Shaft |
High Grade forged 45# Steel with 1st Rough Finished and then 2th Refined Finished |
|
16 |
Diameter of the Roll |
100mm |
|
17 |
Material of Roller |
High Quality Cr12 Quenched HRC58-62 ° |
|
18 |
Processing Technology |
Rough Processing ---Refined Processing--Hard Chromium Plating. |
|
19 |
Material of Rack |
Complete Welded Structure of A3 Steel Plate 20 mm Thickness |
|
20 |
Transmission |
Chain or Gear Box or universal joint |
|
21 |
Material of cutting blade |
Cr12 with Quenched Treatment 60-62 ° |
|
22 |
Cutting system |
Hydraulic Stop or Tracking Cutting |
|
23 |
Voltage |
380V/50HZ/3 Phase or as Customer Require |
Â
Â
Bridge Highway Barrier Guardrail Profiles Roll Forming Machine (Complete Machine Picture)
hole press device
steel strip level machine
steel strip decoiler
PLC control system:Â Panasonic brand
Loading pictures:
Â
The anchor drilling rig is mainly used in hydro power stations, railways and highways, in order to prevent and control various geological disasters, anchoring operations are carried out on landslides and dangerous rock masses.It is mainly used in landslide and dangerous rock anchoring projects in tunnels, railways, highway slopes and other kinds of geology, especially for high slope rock anchoring projects. Drilling operations consume less manpower and material resources, have high construction efficiency and high safety factor. It is also suitable for the construction of deep foundation pit support, reinforcement hole for anti-float anchor and foundation grouting, blast-hole in blasting project, high pressure sprinkling stake and tunnel pipe support hole, etc..
The drilling technology with casing of anchor drilling rig is designed to solve the problem that complex rock layers cannot be holed. The drill bit impacts rock continuously, and the broken rock is blown to the ground by the air pressure discharged from the gap between the casing and the drill pipe. The drill pipe and bit can be lifted after punching the hole, and the casing is placed in the middle of the rock layer, so that the rock layer doesn't collapse.
Anchor Drilling Machine,Roof Bolter,Bolting Machine,Anchor Bolt Drilling Machine
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrillingwx.com