Perfume Electrolytic Aluminum Pump Perfume Electrolytic Aluminum Pump,Perfume Atomizers,Perfume Spray Bottle,Perfume Sprayer Zhangjiagang XinYe Chemical Sprayer Co., Ltd. , https://www.xinyesprayer.com
　　
2, the installation should be carefully checked before the pump is damaged, if damaged, until the repair properly, before installation.
　　
3, the installation should pay attention to check whether the loose parts of the connection, the blade and the tube should be uniform gap, shall not touch. Exhaust fan and exhaust fan should be set interlock device, when any one of the exhaust port is opened, the exhaust fan that can automatically start.
　　
4, the weight of the joint tuyere pipe should not be borne by the vortex pump air duct, the installation should be coupled with the support frame.
　　
5, impeller rotation direction must be consistent with the arrowhead roof fan head mark.
　　
6, whirlpool air pump, fan base must be naturally bonded with the foundation plane, do not beat the base mandatory connection, to prevent the base deformation, the installation should be corrected base, add horn, the basic level, and then tighten the anchor bolts.
　　
7, after the installation is completed, you must first experiment, to be functioning properly, before allowing official use.
　　
8, the installation is completed Use the process to regularly check the fan components, check the bearing lubrication is sufficient to ensure that the fan can start normal work.
Vortex pump installation should pay attention to several issues
1, First of all understand the vortex pump specifications, forms, inlet and outlet position and the corresponding installation size, with the motor power requirements.