High Pressure Multistage Boiler Feed Water Pump



Summerize
Model QD (G) high pressure pump is a horizontal multi-stage centrifugal pump and suitable for transporting pure water (with the contained foreign matters' content less than l % and graininess less than 0. 1mm) and other liquids of both physical and chemical natures similar to those of pure water.
 
Performance
QD (G) model high pressure water pump is applicable to transport medium with temperature of not higher than 105ºC, and is also applicable for small boiler water supply or transporting medium similar to hotwater.

Performance range of model QD (G) series
Flow rate: 3~500m3/h
Head: 70~650m
Pressure: 7~65Bar
Speed: 1450~2950rpm
Max Eff: 90%


 
QD (G) model high pressure water pump is applicable to transport medium with temperature of not higher than 160ºC, and is also applicable for small boiler water supply or transporting medium similar to hot water.

 
QD(G) series high pressure water pump is applicable to transport medium with temperature of not higher than 160 degree centigrade, and is also applicable for small boiler water supply or transporting medium similar to hot water.
 
Features
1.Multistage high pressure water pump compact structure, small size, beautiful appearance, its vertical structure decided small installation area, its centre of gravity overlap center of pump foot, thus enhancing the running stability and service life of the pump.
 
2. The multistage high pressure water pump can meet different requirements by increasing or decreasing the pump stages combining cutting impeller diameter, without changing the installation area, and this is the multistage pump special own.
 
3. Pump rotor is provided with low windability to achieve smooth operation, littlevibration, low noise and long service life .
 
4. According to the needs, the suction and discharge nozzles can be installed into the same direction, several different directions in order to meet different connection.
 
5. Motor plus outer rain cover, pump can be placed in the outdoor use, cancel the pump room, save construction cost.
 
Application:
Multistage centrifugal high pressure water pump application scope is widespread, such as medicine, food, chemical industry, irrigation, pressurization, distillation, brewing, fire control, water supply, sewage treatment, electrical and mechanical, printing and dyeing industry, seawater desalination, ship equipment and supporting pressure tank and all walks of life, wide range of uses.
 
Contact An Pump Machinery High Pressure Multistage Boiler Feed Water Pump



Summerize
Model QD (G) high pressure pump is a horizontal multi-stage centrifugal pump and suitable for transporting pure water (with the contained foreign matters' content less than l % and graininess less than 0. 1mm) and other liquids of both physical and chemical natures similar to those of pure water.
 
Performance
QD (G) model high pressure water pump is applicable to transport medium with temperature of not higher than 105ºC, and is also applicable for small boiler water supply or transporting medium similar to hotwater.

Performance range of model QD (G) series
Flow rate: 3~500m3/h
Head: 70~650m
Pressure: 7~65Bar
Speed: 1450~2950rpm
Max Eff: 90%


 
QD (G) model high pressure water pump is applicable to transport medium with temperature of not higher than 160ºC, and is also applicable for small boiler water supply or transporting medium similar to hot water.

 
QD(G) series high pressure water pump is applicable to transport medium with temperature of not higher than 160 degree centigrade, and is also applicable for small boiler water supply or transporting medium similar to hot water.
 
Features
1.Multistage high pressure water pump compact structure, small size, beautiful appearance, its vertical structure decided small installation area, its centre of gravity overlap center of pump foot, thus enhancing the running stability and service life of the pump.
 
2. The multistage high pressure water pump can meet different requirements by increasing or decreasing the pump stages combining cutting impeller diameter, without changing the installation area, and this is the multistage pump special own.
 
3. Pump rotor is provided with low windability to achieve smooth operation, littlevibration, low noise and long service life .
 
4. According to the needs, the suction and discharge nozzles can be installed into the same direction, several different directions in order to meet different connection.
 
5. Motor plus outer rain cover, pump can be placed in the outdoor use, cancel the pump room, save construction cost.
 
Application:
Multistage centrifugal high pressure water pump application scope is widespread, such as medicine, food, chemical industry, irrigation, pressurization, distillation, brewing, fire control, water supply, sewage treatment, electrical and mechanical, printing and dyeing industry, seawater desalination, ship equipment and supporting pressure tank and all walks of life, wide range of uses.
 
Contact An Pump Machinery

Die Casting Molds

Fast delivery, not easy to rust, complete specifications, strict selection of materials, support customization, timely after-sales. Sophisticated and mature mold manufacturing process. High hardness, not easy to wear, fast delivery. Selection of fine steel, high temperature quenching, shaping and shaping, carefully grinding, using grinder edge, strict quality inspection, logistics and transportation, perfect after-sales service. Our products are directly supplied by manufacturers, original factory manufacturing, quality assurance. Regular specifications of the product spot enough, fast delivery. You can consult us if you are interested.

Die Casting Molds, Die Casting Mould Manufacturer, Mould Die Casting Mould Die Manufacturer

Sung Precision Mould & Plastic Co., Ltd. , https://www.injectionmoldingfactorys.com