·Huachen BMW Automobile Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. recalled some domestic and imported BMW cars

Recently, BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. filed a recall plan with the AQSIQ according to the requirements of the Regulations on the Management of Defective Automobile Product Recall, and decided to recall the following from March 27, 2017. Vehicles, a total of 8604 vehicles:
(1) BMW Brilliance Automotive Co., Ltd. recalled some domestically produced Brilliance BMW 535Li, which was produced during the period from April 13, 2011 to June 30, 2011, totaling 1,179 vehicles;
(2) BMW (China) Automobile Trading Co., Ltd. recalled some of the imported BMW 335i, 535i, 640i, 730Li, 740Li and Z4 produced between December 1, 2010 and April 29, 2011, for a total of 7,425 vehicles.
The recall involved flexible connectors for the rear drive vehicle drive shaft. Due to the manufacturer's manufacturing reasons, the specific batch of connectors is insufficient in strength and may be damaged or broken after long-term use. If the connecting member breaks while the vehicle is running, the vehicle will lose its driving force, increasing the risk of traffic accidents and posing a safety hazard. BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. will conduct free inspections for vehicles within the scope of the recall. If the connecting parts installed on the vehicle are defective batch products, they will be replaced free of charge to eliminate potential safety hazards.
BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. will notify customers by registered mail. Users can call the BMW Service Hotline 400-800-6666 for consultation. If you feel abnormal noise or abnormal vibration during driving, please go to the authorized dealer for inspection. Owners can also visit the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC) for more information. In addition, you can also call the Quality Hotline of the Defective Product Management Center of the AQSIQ or the quality hotline of the local entry-exit inspection and quarantine institution: 12365 (switch No. 2) to reflect the problems in the implementation of the recall activity or to submit defects.

Desktop Laser Machine

UTECH Desktop Mini Laser Engraver is equipped with Texas 32 Bit DSP control system, there is a Flash memory on the mother board, you can download the work file to the machine via USB cable.
Mini Laser Engraver is most suitable and the preferred choice of equipments in industries such as advertisement, gifts, shoes, toys, and etc.

Desktop Laser Engraving Machine feature:

1. Adjustable Speed and Power, Smooth and Precise Engraving and Cutting
2. USB Interface
3. Air Assist, Remove heat and combustible gases from the cutting surface.
    60W Air pump
4. Embedded Exhaust Fan, Easier intall, Safer transport.
    40W  exhaust fan, flow can be  5.27m³\Min.
5. Rotary Axis, Engrave any cylindrical object.
6. Aluminum table platform, Leave no chippings on working area.
7. LCD english Panel and DSP control system, easy to operate
8. Water Cooling and Protection System.
     The tube will not work without water, to protect laser tube.
9. Advanced Red cross position. easy to identify laser position.
10. Emergency Stop Button.
11. Lift handle on side, easy to lift the machine.
12. Manual or Electircal up down table optional
13. Taiwan Imported Hiwin linear rail transmission
14. Laser focal length: 50.8mm
15. Limit switch on front door & laser tube cover, once open any cover, it will stop work.
16. Machine service life: 1000-1500H for laser tube, 3-5 years for machine body.

Available Industries:
Marble engraving , tombstone carving , stone engraving  , advertisements , packing and printing , molding and art craft industries.

Customized model:

UT-1490/1610/1325/1318, etc.