The National IV Dongfeng Ruiling Medical Waste Transfer Vehicle, the National IV emission standard, adopts the Dongfeng Ruiling Class II cargo carrier, model DFA1041SJ35D6. The engine uses the D28D10-4DA, 75-power/102-hp diesel engine produced by Dongfeng Light Engine Co., Ltd. Cab with rollover, single row cab, cab with direction assistance, clutch booster, front axle 2 tons, rear axle 4 tons, wheelbase 3300, tire 7.00R16 wire tire. Body introduction: the body is fully enclosed, the back door is a double sealed structure (set the double back door and the inner door two doors, a gas spring is set on the inner door to facilitate the opening of the inner door up and down) to ensure that the inside of the box is filled with rubbish The partition of medical treatment and the outside world also facilitates the loading and unloading of goods. The stainless steel plate inside the body is used for the inside wall, and the corrosive disinfectant is resistant to acids and alkalis. Arc stainless steel and corners are arranged around the inside of the compartment. There is no clear corner for disinfection and cleaning. . L-type compartment: The medical waste transfer car compartment is divided into the cargo loading compartment and the medical article storage compartment. A single-side door is set outside the medical article storage compartment (the assistant driver) to facilitate the storage of medical and medical equipment to ensure the safe storage of medical waste. And the personal safety of staff. Automatic spraying device (optional): The medical waste transfer body can be equipped with an automatic spraying device. The automatic spraying control system is set in the cab or in the compartment where the medical device is placed, for the type of the disinfecting solution and the spraying time. The requirements of the spray time setting adjustment (10S-5min), the use of automatic spraying device, spraying the disinfectant can quickly kill a variety of microbial bacteria in the cabin, so that transport and handling more secure and reliable. Contact Tel 0722-3821899 Contact, Zhou Zhongxing http:// Http :// WWW . HBCL99 . COM Sales Hotline: 15897596858
Description For Stainless
Steel Wire Mesh Filter Tube
Product Name: wire
mesh filter tube ,cylinder filter tube
Structure: combined
of woven wire mesh and flange, single layer and multi-layer
Material : woven
wire mesh, metal Perforated Sheet ,expanded metal mesh
Production Technology:
welded by Stainless Steel Wire Mesh
Features :the
surface looks bright and smooth, corrosion resistance, durable
Working principle:
remove a small amount of impurities in the filter medium, which can ensure the
normal operation of the equipment and clean air. When the fluid passes through
the filter cylinder with a certain accuracy, the impurities are blocked, and
the clean flow through the filter cylinder, in order to achieve the clean state
required by our production.
The applications
of wire mesh filter tube
1, For some fine
particles, the liquid has good filtration, large flow per unit area, can be
used repeatedly after cleaning.
2, It is a
detachable cylindrical device, enclosed at the top and bottom, surrounded by a
filter medium, belonging to deep filtration.
3,The solid
particles in the suspension are smaller than the aperture of the filter, which
is suitable for the occasions where the particles in the suspension are very
small and the content is small.
4, Acid and alkali
resistance, corrosion resistance, not easy to damage, can be used repeatedly
after cleaning.
Wire Mesh Filter Tube,Stainless Steel Mesh Tube,Mesh Filters,Wire Mesh Tube Suzhou Haoxiang Screen Stencil Products Co.,Ltd , https://www.haoxiangwiremesh.com
Office Phone: 0722-3821899
E-mail:
