Model NO.: STC-24
Conditions of Use: Land Use
Usage: Common Units, Standby Unit, Emergency Crew
Landuse Type of Unit: Ordinary
Excitation Mode: AC Rotating Exciter
Color: Red/Black/Green/Yellow
Quality: 100% Copper Winding
Exciting Mode: Self-Excited
Warranty: 12 Months/1000 Running Hours
Fan: Plastic/ Aluminium
Model: Double-Bearing
Trademark: DACPOWER
Transport Package: Non-Fumigation Plywood Case
Specification: 0.18cbm
Origin: Fujian
HS Code: 8501610000
Model NO.: STC-24
Conditions of Use: Land Use
Usage: Common Units, Standby Unit, Emergency Crew
Landuse Type of Unit: Ordinary
Excitation Mode: AC Rotating Exciter
Color: Red/Black/Green/Yellow
Quality: 100% Copper Winding
Exciting Mode: Self-Excited
Warranty: 12 Months/1000 Running Hours
Fan: Plastic/ Aluminium
Model: Double-Bearing
Trademark: DACPOWER
Transport Package: Non-Fumigation Plywood Case
Specification: 0.18cbm
Origin: Fujian
HS Code: 8501610000
24kw 3-phase ac synchronous brushes alternator Data Sheet:
| Model | STC-24 |
| Output | 24kw |
| Voltage(V) | 220/380v, 230/400v,110/120v |
| Frequency | 50hz/60hz |
| Speed | 1500rpm/1800rpm |
| Current(A) | Depends |
| Power Factor | cosΦ 0.8 |
| Phase | 3 |
| Efficiency | 84.6% |
| Short Circuit Current Capacity | >300% |
| Recovery time | 0.5S |
| Voltage regulation | ±5% |
| Duty | S1 |
| poles | 4 |
| Insulation class | B |
| Excitation type | Brush,Harmonic excitation system |
| Overload | 10%for 1hour,in every 12hours |
| Type of cooling | IC01 |
| Ambient Temperature | 40ºC |
| Above sea level | Not exceed 1000m |
| Cooling air temperature | (-15ºC  ~ 40 ºC) |
| Protection/Enclosure | IP23 |
| Maximum Overspeed | 2160r.p.m. |
| Net weight | 140kg |
| Gross weight | 150kg |
| Packing Dimension(L*W*H) | 700*425*605mm |
Our Factory & Office:
Certifications:
Please Contact Me:
 24kw 3-phase ac synchronous brushes alternatorÂ
Data Sheet:
| Model | STC-24 |
| Output | 24kw |
| Voltage(V) | 220/380v, 230/400v,110/120v |
| Frequency | 50hz/60hz |
| Speed | 1500rpm/1800rpm |
| Current(A) | Depends |
| Power Factor | cosΦ 0.8 |
| Phase | 3 |
| Efficiency | 84.6% |
| Short Circuit Current Capacity | >300% |
| Recovery time | 0.5S |
| Voltage regulation | ±5% |
| Duty | S1 |
| poles | 4 |
| Insulation class | B |
| Excitation type | Brush,Harmonic excitation system |
| Overload | 10%for 1hour,in every 12hours |
| Type of cooling | IC01 |
| Ambient Temperature | 40ºC |
| Above sea level | Not exceed 1000m |
| Cooling air temperature | (-15ºC  ~ 40 ºC) |
| Protection/Enclosure | IP23 |
| Maximum Overspeed | 2160r.p.m. |
| Net weight | 140kg |
| Gross weight | 150kg |
| Packing Dimension(L*W*H) | 700*425*605mm |
Our Factory & Office:
Certifications:
Please Contact Me:
Â
EDM graphite, also known as graphite block for EDM, is a new type of material, which is now more and more widely used in the precision mold processing industry. At present, in mold processing plants in developed European countries, more than 90% of mold processing electrode materials are graphite. Copper, the once dominant electrode material, has almost lost its advantages compared with graphite electrodes.
Our isostatic graphite and Molded Graphite were tested at the National Electrical Carbon Products Quality Supervision and Inspection Center. The main physical and chemical performance index as follows: the compressive strength--125 mpa, shore hardness -- 65 degrees, resistivity --12 mu Ω m. At the same time, the 10μm,8μm,6μm,4μm products have already began Large-scale production,.and unanimously acknowledged by customers. The 2μm,1μm graphite products are under trial. Our company high quality of isostatic pressing special graphite yield above 90%, far ahead of industry the yield of 70%, the first in the country.
Our isostatic graphite and Molded Graphite were tested at the National Electrical Carbon Products Quality Supervision and Inspection Center. The main physical and chemical performance index as follows: the compressive strength--125 mpa, shore hardness -- 65 degrees, resistivity --12 mu Ω m. At the same time, the 10μm,8μm,6μm,4μm products have already began Large-scale production,.and unanimously acknowledged by customers. The 2μm,1μm graphite products are under trial. Our company high quality of isostatic pressing special graphite yield above 90%, far ahead of industry the yield of 70%, the first in the country.
Company main products:
2.Molded graphite block
3.Graphite rod
4.Graphite tube
5.Graphite plate
7.Graphite crucible
Customized High Pure and density graphite products/graphite block for EDM
Edm Graphite,Graphite Block For Edm,Edm Graphite Electrodes,Isostatic Graphite Column
Henan Carbons New Material Technology Co., Ltd. , https://www.kyedmgraphite.com